3 9900 1 Manual

Signet 9900 Transmitter
English
The 9900 Transmitter, a member of Signet's line of SmartPro™ instruments, provides a

English Signet 9900 Transmitter.3-9900.090. 3-9900.090 Rev. D 12/13 Operating Instructions Quick Start Your new Signet 9900 Transmitter needs to be calibrated and the sensor needs to be initialized prior to use. The following steps outline the recommended procedure to start up a new system. Signet 9900-1BC Batch Controller System 3-9900-1BC.090-1 Rev. A1 03/13 English.3-9900-1BC.090. Product Manual Safety Panel Mount WARNING!. Follow instructions carefully to avoid personal injury. This unit is designed to be connected to equipment which can be. Page 1 10.8 to 35.2 VDC power (24 VDC nominal), and can power certain sensors on loop power (see NOTE on page 11). /counter-strike-1-6-games-3d.html. The 9900 Transmitter, also allows third-party 4 to 20 mA signals to be used as an input (optional Signet 8058 i-Go Signal Converter required, sold separately). 3-9900.397 159 310 163 Batch Module Convert a 9900-1P Transmitter (Generation II) into a Batch Controller system by utilizing a Batch Module (3-9900.397) and a Relay Module (3-9900.393). Optional Module Wiring:. Wire an external button or keypad (customer supplied) to stop, start or resume a. Get GF Signet 9900 Transmitter Owner's manual. Get all GF Signet manuals! Sign up to create an account Facebook Twitter. By clicking Create Account, you agree to the Company’s. 3-9900.393 Relay Module. LOOP as well as DC power MUST be removed. BEFORE installing H COMM Module.

single-channel interface for all Flow, pH/ORP, Conductivity/Resistivity, Salinity, Pressure,
Temperature, Level, Dissolved Oxygen, Turbidity, Batch and other applications.
The 9900 is available in either Panel or Field Mount.
Both versions run on 10.8 to 35.2 VDC power (24 VDC nominal),
and can power certain sensors on loop power (see NOTE on pg. 11).
The 9900 Transmitter, also allows third-party 4 to 20 mA signals to be used as an
input (optional Signet 8058 i-Go™ Signal Converter required, sold separately).
Your new Signet 9900 Transmitter needs to be calibrated and the
sensor needs to be initialized prior to use. The following steps
outline the recommended procedure to start up a new system.
2. Installation (pg. 7)
4. Sensor Wiring (pg. 11)
6. Relay and Open Collector Wiring (pg. 18)
8. Operation (pg. 23)
Look for the
to quickly set up
Panel Mount
Description
Field Mount
The 9900 is compatible with all GF Signet products
pH and ORP electrodes require the Signet 2750
®
Conductivity/Resistivity or Salinity measurement
Resistivity Module (part number 3-9900.394) or
Electronics (sold separately).
Digital (S
L) models. The two-channel model
connected. Do not use with both channels
and 3-2850-62 are incompatible with the 9900.
Dissolved Oxygen measurement using Signet
Converter (sold separately).
Flow
2507, 2536*/8512*, 2537, 2540*,
Manual
pH/ORP
2756-WTx–2757-WTx with
2764-2767 with 2750*
Conductivity/Resistivity, Salinity
2850 or Cond/Res Module
2850 or Cond/Res Module
2250*, 2350*, 2450*
4150 requires 8058
2610-41 direct to 9900

Gf Signet 3-9900-1 Manual

* Can be run on Loop Power

Summary of content (64 pages)

9900 Transmitter
88.90 mm
25°
88.90 mm
0.68 mm
3-9900.396 Angle Adjustment Adapter Kit
Dimensions & Module Installation
3-9900-1P
54.10 mm
91.44 mm
29.97 mm
8.13 mm
99.06 mm
99.06 mm
Field Mount
(3-8051-X shown)
NOTE: 3-8051-X Integral Mounting Kit sold separately.
(0.95 in.)
(3.50 in.)
(1.75 in.)
(4.21 in.)
If the 9900 Base Unit will be mounted in a panel, the plug-in
modules may be installed either before or after the base unit
is mounted. If the 9900 Base Unit will be mounted using the
accessory wall mount bracket, install plug-in modules fi rst.
Manual
If installing both the Conductivity/Resistivity (Cond/Res) and
the H COMM Modules, install the H COMM Module fi rst, then
the Cond/Res Module on top of it (see illustration on page 5).
Remove power from the 9900. Carefully align pins and connectors
(do not bend connecting pins) and push module firmly into place,
Relay Module
Only)
Resistivity
H COMM
Base Unit
DC Power
Rating:
~
׽׽
Cond/Res Module
CAUTION

Signet 3-9900-1 Manual

BEFORE installing H COMM Module.
Exercise care when installing modules.
To remove modules:
For Relay, Cond/Res, and 4 to 20 mA Output Modules,
unplug connectors, remove screw(s), and carefully pull module
straight out from the base unit. Do not bend the connecting pins.
For H COMM Module, squeeze the tabs on the bottom edge,
grasp the module and pull straight out. Do not bend the
For Batch Module, remove the Relay module. Loosen bottom
screw of Batch module. Carefully grip and squeeze the tabs at
the top of the module to release. Pull module away from the

3 9900 1 Manual Download

Module Installation

Gf 3-9900-1 Manual

Relays may be connected to external

3 9900 1 Manual Pdf

sources creating an electrocution hazard.